Begin with the applicable local code
A U.S. market specification should begin with the local code applicable to the project address and work type. The code identifies the requirements that must be addressed, but it is not appropriate to assume one rule applies everywhere. Identify the jurisdiction, whether the work is new construction or a renovation, and which documents the local authority requests. The specification should state its assumptions and identify what must be confirmed before purchase or installation.
Complete the structural review
Tile weight and existing conditions must be evaluated together with the structure that will support them. For a commercial estimate, ROV uses 122 tiles per square for Top Telha Spanish S and 114 for Vilhena Grés Spanish S, always with the project’s defined waste allowance. These rates organize the commercial quantity and do not replace structural review, measurement, or confirmation of the chosen variant’s weight data. Record estimated weight per square only from the current specification sheet.
Describe fastening and wind resistance by system
The specification should identify the proposed fastening system, where it applies, and how fastening relates to roof geometry and site conditions. Wind resistance must be addressed for the system, not as an isolated tile characteristic. Describe the assembly being evaluated: tile, fasteners, substrate, edges, intersections, and other relevant components. Do not assign performance that was not provided; the applicable value or requirement must be confirmed for the configuration that will actually be proposed.
Keep current approvals under review
Before finalizing the specification, verify that the approvals and documents required for the product and system remain current in the applicable jurisdiction. Repeat this check whenever the profile, color, fastening method, substrate, or wind condition changes. Record the source and verification date in the project process, without making a broader claim than the documents support. A responsible specification clearly identifies the local code, structural review, fastening system, wind resistance, and every item still awaiting confirmation.
